Water Heater - Kuuma Aluminium 45 Litre - Side Mount Tabs 41110
(Kuuma  was formerly branded Force 10 Marine)

Direct replacement for most Seaward, & Atwood Marine Water heaters.

These marine hot water systems are designed for use in boats, and are also installed in many motor homes, RV's and transport trucks. 
Tested and certified to the latest Australian standard AS/NZS 60335.2.21-2002 - ESO Approval No. Q080349 and ignition protected.
All Kuuma water heaters are now supplied with a sacrificial anode. 

  • Capacity: 11 Gallons (45 litres)
  • Case Material: Aluminium
  • Voltage: 230 Volt AC 1500 Watts
  • Heat Exchanger Position: front
  • Mount Postion: Side
  • Length: 545mm
  • Width: 475mm (including mounting tabs)
  • Height: 405mm
  • Dry Weight: 18kg

All Kuuma water heaters are now supplied with a sacrificial anode – this is the initial anode only and any subsequent anodes must be purchased separately. Anodes should be checked at least every three (3) to four (4) months.
Refer to the manual for advice on tank maintenance & care.

* Not recommended for use with raw/salt water in the engine heat exchange circuit as this will shorten the life of your water heater.
Direct replacement for most Seaward, & Atwood Marine Water heaters.

 

(990394)

SKU 990394
Model # 41110
Brand Kuuma
Artist / Author Ruth Cunningham
Shipping Weight 21.0000kg
Shipping Width 0.470m
Shipping Height 0.510m
Shipping Length 0.660m
Shipping Cubic 0.158202000m3
Unit Of Measure Each

More From This Category