Hot Water Heater Stainless Steel Basic 40L 750W Isotemp 135702

Australian Standards Approved. 
Volume: 40L 

  • Style: Basic 
  • Dimensions (Length x Dia): 630mm x 395mm 
  • Weight: 17kg 
  • Max. Pressure: 5.0bar 
  • Immersion Heater: 240volt - 750 watt

Includes:

  • Pressure Relief valve with brass T fitting. (see picture above)
  • Australian 240V plug.

Hot water on your boat!   ​

  •  Isotemp water heaters may be used with freshwater or saltwater cooled engine systems.
  • Optimal water heating is achieved in two ways, firstly by an immersed electric heating element (immersion heater) and secondly by utilising the boat's engine water heat (heat exchange).
  • The immersion heater has been designed to enable easy removal to allow for inspection and cleaning of the tank.
  • Smart finish in a brushed stainless steel exterior, the quality of the Isotemp Basic by Isotherm®, is not just skin deepThe internal tank is insulated with expanded polyurethane insulation ensuring low temperature loss. 
  • The fixing feet are adjustable to 360°, allowing the tank to be mounted horizontally or vertically.

An optional accessory is a thermostatic mixing valve, (which controls the maximum temperature of water at the tap) this adds to safety, particularly important if having young children on board.

(991229)

SKU 991229
Model # IT-604031B000003
Barcode # 9319786220030
Brand Isotherm
Shipping Weight 18.0000kg
Shipping Width 0.500m
Shipping Height 0.500m
Shipping Length 0.700m
Unit Of Measure Each

We Also Recommend

More From This Category