Rocna Vulcan Anchor - Galvanised 40kg (88lb)- Vulcan40 - VLC40GS

Suits most boats 14 to 24m (46ft - 79ft) - Refer to Sizing Recommendation Chart - (displayed in the above pictures).

With no roll bar and a compact shank profile the Rocna Vulcan anchor ensures an easier, snug fit on a wide variety of bow rollers.

The Rocna Vulcan anchor features a patented shank and fluke geometry – including an innovative roll-palm™ (A) at the rear of the fluke – which self-rights the anchor on the seabed. This is assisted by the V-bulb™ (B) which extends fluke ballast downward to gain maximum leverage and efficiency. This development permits a larger fluke surface area than competing designs, while the concave fluke (C) is similar in design to the Rocna.

Features:

The Rocna Vulcan shank is designed so the anchor self-launches and self-stows on the majority of bow-rollers, with the greatest possible reliability.

• All Rocna anchors have shank shapes that are designed to self launch.
• All Rocna anchors have a design that encourages the anchor to self right.
• Excellent "setting" ability on the ocean floor or seabed.
• Rocna anchors are true multi-purpose anchors that set and hold in most seabeds, from soft mud to hard sand, clay, grass, and kelp.
• Compatible with the most boats
• Quick sets across a range of bottom types
• Rock solid holding power
• Self-launching
• Resistant to wind and tide shifts
• Guaranteed for life

SELF-DEPLOYING AND SELF-RECOVERING!
These anchors have been extensilvely tested and are very highly regarded by experienced sailors and boatowners.

Recommendations:

• Please check the recommended anchor size for your boat on the Boat Sizing Chart.
• Please check the anchor's dimensions then also download a printout of the anchor and check carefully that it will fit your boat.