P102825 Maxwell Anchor Winch HRCFF8 - 600W

Maxwell Anchor Winch HRCFF8 - 600W - 12V 8mm P102825
Suits 8mm SL Chain & 14mm Rope

Freefall or Control Up/Down from the helm.

Suits:

Most boats up to 10m (33Ft)
8mm SL Chain and 14mm Rope Combo (soft spliced together) or all chain.

Benefits:
This winch will allows you a choice of using or power up and down or power up and Freefall down.
(Just flick the toggle on the side of the winch to change). Winch can be opereated by deck switches and/or from the helm.

Specifications:

Motor: 600W 12V
Rope Size: 14mm
Chain Size: 8mm
Maximum Pull Lift: 410 kgs
Static Hold: 700 kgs
LIne Speed: 33m/minute
Net Weight: 12 kgs

Features:

Simple ‘bolt down’ installation ensures effortless and rapid on-deck installation and set up.
Guaranteed trouble free rode transition from rope to chain, by means of an innovative, proven and patented pressure arm system, within a safe enclosed design.
Integrated composite nylon, through deck hawse pipe for ease of installation and smooth, snag-free operation.
Compact aesthetically pleasing above deck design, encapsulating the motor and drive in a watertight case.
Emergency ‘free fall’ function in the event of onboard power failure. (Activated by the supplied, emergency ‘Free Fall’ lever).
Revolutionary Wave Design™ chainwheel - suits rope and chain - grips the rope better.

Full details and dimensions are on the PDF brochure (above).

(990471)

What's In the Box?

Anchor Winch with gearbox
Chainwheel suits both chain and rope
Dual direction solenoid (included)
Clutch release handle (included)
Owners Installation manual with
- deck template,
- wiring instructions and
- installation instructions.

You will also need:

A correctly sized, circuit breaker and either two deck switches, and/or a panel up/down switch.
I strongly recommend using the Maxwell matched rope chain kit, as it transitions smoothly from the soft splice rope to chain, and, the chain wheel (gypsy) grips this rope very well. Plus, it is best of both worlds having chain (which doesn't chafe) near the anchor, and strong 8 plait rope (which is much lighter) for the rest.
(See Related Products shown below)

Other Accessories:

Browse below (or the the "Anchor Winch Electrical Accessories" category of this website) for additional optional accessories such as remote controls and anchor chain counters.
Browse the "Additional Hardware Accessories" for items such as snubbers - (see the left hand menu).

Important: Maxwell windlasses must be used in conjunction with a chain stopper or alternative snubbing device to take the load off the windlass while laying at anchor. the chain stopper and alternative snubbing system should also be used to secure the anchor in the fully raised position while under way.

Tips and Advice -

You will also need:

A correctly sized, circuit breaker and either two deck switches, and/or a panel up/down switch.
I strongly recommend using the Maxwell matched rope chain kit, as it transitions smoothly from the soft splice rope to chain, and, the chain wheel (gypsy) grips this rope very well. Plus, it is best of both worlds having chain (which doesn't chafe) near the anchor, and strong 8 plait rope (which is much lighter) for the rest.
(See Related Products shown below)

Other Accessories:

Browse below or the "Anchor Winch Electrical Accessories" category of this website for additional optional accessories such as remote controls and anchor chain counters.
Browse the "Additional Hardware Accessories" for items such as snubbers - (see the left hand menu).

SKU	990471
Model #	P102825
Brand	Vetus Maxwell
Shipping Weight	12.6500kg
Shipping Width	0.250m
Shipping Height	0.370m
Shipping Length	0.370m
Unit Of Measure	Each