P100246 Maxwell Anchor Winch HRC10-8

Maxwell Anchor Winch HRC10-8 - 1000W 12V 8mm P100246 - Suits 8mm SL Chain & 14 -16mm Nylon Rope

Suits:

Most boats up to 14m (46 Feet)*
8mm SL Chain and 14-16mm Rope Combo (soft spliced together) or all chain.

Specifications:

Motor: 1000W 12V
Rope Size: 14 - 16mm
Chain Size: 8mm SL
Maximum Pull Lift: 700 kgs
Static Hold: 1500 kgs
LIne Speed: Rope 20m/minute or chain 24m/minute
Net Weight: 18 kgs

Features:

Fully Austomatic rope/chain
This two piece watertight case allows for quick and easy, on-deck, routinemaintenance.
Simple ‘bolt down’ installation ensures effortless and rapid on-deck installationand set up.
The stainless steel (AISI 316) pressure arm always exerts maximum controlpressure on the rode (rope, splice or chain).
Cone type clutch/brake mechanism permits manual, ‘free fall’ anchoring andemergency crank recovery of the rode and anchor if required.• The sealed oil bath and marine-grade hard anodised, alloy gearbox provides highefficiency output drive via precision worm and wormwheel.
Revolutionary Wave Design™ chainwheel - suits rope and chain - grips the rope better.or can be used as all chain.

Full details and dimensions are on the PDF brochure (above).

(990472)

What's In the Box?

Anchor Winch with gearbox
Chainwheel suits both chain and rope
Dual direction solenoid (included)
Clutch release handle (included)
Owners Installation manual with
- deck template,
- wiring instructions and
- installation instructions.

You will also need:

A correctly sized, circuit breaker and either two deck switches, and/or a panel up/down switch.
I strongly recommend using the Maxwell matched rope chain kit, as it transitions smoothly from the soft splice rope to chain, and, the chain wheel (gypsy) grips this rope very well. Plus, it is best of both worlds having chain (which doesn't chafe) near the anchor, and strong 8 plait rope (which is much lighter) for the rest.
(See Related Products shown below)

Other Accessories:

Browse the "Anchor Winch Electrical Accessories" category of this website for additional optional accessories such as remote controls and anchor chain counters.
Browse the "Additional Hardware Accessories" for items such as snubbers - (see the left hand menu).

Important: Maxwell windlasses must be used in conjunction with a chain stopper or alternative snubbing device to take the load off the windlass while laying at anchor. the chain stopper and alternative snubbing system should also be used to secure the anchor in the fully raised position while under way.

Tips and Advice -

You will also need:

A correctly sized, circuit breaker and either two deck switches, and/or a panel up/down switch.
Whilst you ca use all chain if you wish to save weight I can recommend using the Maxwell matched rope chain kit, as it transitions smoothly from the soft splice rope to chain, and, the chain wheel (gypsy) grips this rope very well. Plus, it is best of both worlds having chain (which doesn't chafe) near the anchor, and strong 8 plait rope (which is much lighter) for the rest.
(See Related Products shown below)

Other Accessories:

Browse below or the "Anchor Winch Electrical Accessories" category of this website for additional optional accessories such as remote controls and anchor chain counters.
Browse the "Additional Hardware Accessories" for items such as snubbers - (see the left hand menu).

Vetus Maxwell winches can be shipped to most of Australia - refer to the freight calculator.
We prefer a business address if possible - (someone will need to be present to sign for the delivery).

SKU	990472
Model #	P100246
Brand	Vetus Maxwell
Shipping Weight	24.0000kg
Shipping Width	0.290m
Shipping Height	0.430m
Shipping Length	0.480m
Unit Of Measure	Each