P100248 Maxwell Anchor Winch HRC10-10

Maxwell Anchor Winch HRC10-10 - 1200W 12V 10mm P100248
Suits 10mm SL Chain & 16mm Nylon Rope

Suits:

Most boats up to 16m (52 Feet)*
10mm SL Chain and 16mm Rope Combo (soft spliced together) or all chain.

Specifications:

Motor: 1200W 12V
Rope Size: 16mm
Chain Size: 10mm SL
Maximum Pull Lift: 850 kgs
Static Hold: 1500 kgs
LIne Speed: Rope 20m/minute or chain 24m/minute
Net Weight: 19 kgs

Features:

Fully Automatic rope/chain grip
This two piece watertight case allows for quick and easy, on-deck, routinemaintenance.
Simple ‘bolt down’ installation ensures effortless and rapid on-deck installationand set up.
The stainless steel (AISI 316) pressure arm always exerts maximum controlpressure on the rode (rope, splice or chain).
Cone type clutch/brake mechanism permits manual, ‘free fall’ anchoring andemergency crank recovery of the rode and anchor if required.• The sealed oil bath and marine-grade hard anodised, alloy gearbox provides highefficiency output drive via precision worm and wormwheel.
Revolutionary Wave Design™ chainwheel - suits rope and chain - grips the rope better.or can be used as all chain.

Full details and dimensions are on the PDF brochure (above).

(990474)

What's In the Box?

Anchor Winch with gearbox
Top Works
Chainwheel suits both chain and rope
Dual direction solenoid (included)
Emergency crank/clutch release handle (included)
Owners Installation manual with
- deck template,
- wiring instructions and
- installation instructions.

You will also need:

A correctly sized, circuit breaker and either two deck switches, and/or a panel up/down switch.
I strongly recommend using the Maxwell matched rope chain kit, as it transitions smoothly from the soft splice rope to chain, and, the chain wheel (gypsy) grips this rope very well. Plus, it is best of both worlds having chain (which doesn't chafe) near the anchor, and strong 8 plait rope (which is much lighter) for the rest.
(See Related Products shown below)

Other Accessories:

Browse the "Anchor Winch Electrical Accessories" category of this website for additional optional accessories such as remote controls and anchor chain counters.
Browse the "Additional Hardware Accessories" for items such as snubbers - (see the left hand menu).

Important: Maxwell windlasses must be used in conjunction with a chain stopper or alternative snubbing device to take the load off the windlass while laying at anchor. the chain stopper and alternative snubbing system should also be used to secure the anchor in the fully raised position while under way.

Tips and Advice -

You will also need:

A correctly sized, circuit breaker and either two deck switches, and/or a panel up/down switch.
Whilst you can use all chain I also recommend using the Maxwell matched rope chain kit, as it transitions smoothly from the soft splice rope to chain, and, the chain wheel (gypsy) grips this rope very well. Plus, it is best of both worlds having chain (which doesn't chafe) near the anchor, and strong 8 plait rope (which is much lighter) for the rest.
(See Related Products shown below)

Other Accessories:

Browse below or the "Anchor Winch Electrical Accessories" category of this website for additional optional accessories such as remote controls and anchor chain counters.
Browse the "Additional Hardware Accessories" for items such as snubbers - (see the left hand menu).

SKU	990474
Model #	P100248
Brand	Vetus Maxwell
Shipping Weight	24.0000kg
Shipping Width	0.290m
Shipping Height	0.430m
Shipping Length	0.490m
Shipping Cubic	0.061103000m3
Unit Of Measure	Each