View PDF BrochureHydrive SportKit - Admiral Deluxe Helm Version
Side Mount Hydraulic Outboard Steering Kit - SportKit
SportKit Admiral Deluxe Helm Version Complete Side Mount Hydraulic Steering Kit with Helm Upgrade to 401
SPORTKIT(This is the Comkit Sport PLUS AN UPGRADE to the 401 HELM)
For Single Outboards up to 200HP or dual outboards Counter-rotating up to 300HP total.
(This kit has the deluxe 401 helm pump - there is also a cheaper version of this kit (called Conkit-Sport) in the Hydrive Commander range.
You can easily upgrade your boat's steering! Get rid of your boat's old push pull, cable steering and install this smooth hydraulic steering kit.
Hydrive Side or tube-mount type cylinders are very popular because of the ease of fitting and the economical price.
This kit offers a very simple upgrade from cable steering to hydraulic steering for vastly improved results.
For smaller outboards, side mount kits (the Sports Kit models - where the cylinder attaches to one side of the outboard) are cheaper and easier to install but are more prone to getting accidently damaged.
BULLHORN type steering kite (such as this one) are by far the most popular steering system for outboard motors as they are compact, and require a minimum amount of clearance in an engine well.
Before you change the steering system in your boat but you do need to check that there is enough clearance for the cylinder to fit on the boat - see the dimensional diagram attached.
- Complete Kit comprises:-
- Model 401 Helm - (a better helm than the cheaper Comkit-Sport Kit)
- Model 512TN8 cylinder - same cylinder as the Comkit Sport
- 2 litres ULTRA-15 fluid
- 15Mtrs 3/8” OD Nylon tubing
- Bleeding Kit
- All fittings
- Installation Manual
(990139)
SportKit Complete Side Mount Hydraulic Steering Kit
For Single Outboards up to single 200HP (but preferably not 4 Strokes over 135hp with powerful torque)
- Complete Kit comprises:-
- Model 400 Helm (better helm than the Comkit one)
- Model 512TN8 cylinder - same cylinder as the Comkit Sport
- 2 litres ULTRA-15 fluid
- 15Mtrs 3/8” OD Nylon tubing
- Bleeding Kit
- All fittings
- Installation Manual
Tips and Installation Advice:
For all single outboards up to 200HP (excludes 4 Strokes over 90hp - due to their more powerful torque).
Hydrive Side or Tube-mount type cylinders are very popular because of the ease of fitting and the economical price.
It offers a very simple upgrade from cable steering to hydraulic steering for vastly improved results.
Selection of this type of steering is entirely dependent on the HP of the outboard - it will suit all outboards up to (and including) 90HP (and also 2 stroke outboards 90 - 200HP) as the type of mount is universal to all brands and HP of motors that are fitted with tilt-tubes.
Some very small outboards do not have tilt-tubes and therefore must use the same pivoting bracket that is attached to the customer’s current cable.
Fitting is very simple as the hydraulic cylinder screws directly onto the threaded tilt-tube in the same location as the existing cable steering.
It connects to the tiller arm of the outboard using the standard drag-link already connecting the cable.
These side mount kits are economical and very simple to fit.
NOTE: Below is an example of how a Hydrive side mount cylinder attaches to most outboards - however it is not the exact cylinder that is supplied with this kit.
| SKU | 990139 |
| Model # | SPORTKIT |
| Brand | Hydrive |
| Shipping Weight | 9.0000kg |
| Shipping Width | 0.300m |
| Shipping Height | 0.300m |
| Shipping Length | 0.680m |
| Unit Of Measure | Kit |
Hydrive 2 Year Warranty
