Bennett Standard Ram Actuator A1101A

Replacement Bennett Standard Ram Actuator A1101A - 499/351 - For Non EIC (Sold as each)
(These actuators have 4 rings at the base they were often used on Mustang 2800s)

Bennett hydraulic actuators move the trim tab planes.

Although the overall length may vary all models provide a 63mm (2.5″) standard stroke.

How To Identify Which Actuator You Have:

Measure the overall length of the retracted actuator (from the very tip of the triangular top to the absolute bottom of the base lower hinge bracket).

The retracted overall length of the extra short hydraulic actuator is 270mm (10 5/8" ) - Fully extended is 333mm.
The retracted overall length of the short hydraulic actuator is 290mm (11 3/4") - Note most M80/M120 Sports kits have this one. Fully extended is 353mm.
The retracted overall length of this standard hydraulic actuator is 340mm (13 3/4"). Fully extended is 403mm.

If your boat has a control switch with Elecronic Indicator Lights (EIC) then you will need an EIC version actuator which include senders in them.
(Please specify port or starboard when ordering).

(992160)

Advice and Tips:

Most of the M80/120 kits use this actuator but there are also shorter and longer ones.

Although the overall length may vary all models provide a 63mm (2.5″) standard stroke.

How To Identify Which Actuator You Have:

Measure the overall length of the retracted actuator (from the very tip of the triangular top boat mount to the absolute bottom of the base lower hinge bracket).

The retracted overall length of the extra short hydraulic actuator is 270mm (10 5/8" ) - Fully extended is 333mm.
The retracted overall length of the short hydraulic actuator is 290mm (11 3/4") - Note most M80/M120 Sports kits have this one. Fully extended is 353mm.
The retracted overall length of the standard hydraulic actuator is 340mm (13 3/4"). Fully extended is 403mm.

Sold as Each.

If your boat has a control switch with Elecronic Indicator Lights (EIC) then you will need an EIC version actuator which include senders in them.
(Please specify port or starboard when ordering).

SKU	992160
Model #	499/352RC
Brand	Bennett
Shipping Weight	3.1000kg
Shipping Width	0.130m
Shipping Height	0.130m
Shipping Length	0.350m
Unit Of Measure	Each

More From This Category

Bennett 12V Hydraulic Pump V351HPU1

$879.00

2% OFF RRP $901.08

Bennett Short Ram Actuator - With ATP Sender Fitte

$419.00

Bennett SLT10 Actuator Complete Ram A1200SSLT80

$259.00

3% OFF RRP $266.78

Coloured Wiring Harness 22Ft 499/331 for Integrate

$109.00

Bennett Starboard EIC Pig Tail Wire Adapter for EI

$29.00

EIC Wiring Harness 30Ft 10m 499/EIC20130

$334.00

7% OFF RRP $358.42

Welcome to our website.
If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern Boat Gear Australia’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.

The term ‘Boat Gear Australia P/L’ "Boat Gear Australia" or ‘us’ or ‘we’ refers to the owner of the website whose registered office and trading address is Boat Gear Australia Pty Ltd located at Unit 14, 30-34 Octal St Yatala Qld 4207.
Our ABN is 89 629 049 038.
The term ‘you’ refers to the user or viewer of our website.

The use of this website is subject to the following terms of use:

The content of the pages of this website is for your personal customer general information and use only, it may not be used for commercial purposes.
It is subject to change without notice.
Neither we nor any third parties provide any warranty or guarantee as to the accuracy, timeliness, performance, completeness or suitability of the information and materials found or offered on this website for any particular purpose. You acknowledge that such information and materials may contain inaccuracies or errors and we expressly exclude liability for any such inaccuracies or errors to the fullest extent permitted by law.
Your use of any information or materials on this website is entirely at your own risk, for which we shall not be liable. It shall be your own responsibility to ensure that any products, services or information available through this website meet your specific requirements.
This website contains material which is owned by or licensed to us. This material includes, but is not limited to, the design, layout, look, appearance and graphics. Reproduction of photos, text, content or any other part of this website is prohibited unless written approal is given by the Managing Director of Boat Gear Australia P/L.
All trademarks reproduced in this website, which are not the property of, or licensed to the operator, are acknowledged on the website.
Unauthorised use or copying of any content of this website may give rise to a claim for damages and/or be a criminal offence.
From time to time, this website may also include links to other websites. These links are provided for your convenience to provide further information. They do not signify that we endorse the website(s). We have no responsibility for the content of the linked website(s).
Your use of this website and any dispute arising out of such use of the website is subject to the laws of Australia.

Bennett Standard Ram Actuator A1101A - For Non EIC

Replacement Actuator Non EIC

Calculate Shipping

More From This Category

More From This Category

Terms & Conditions

Privacy Policy