Replacement Bennett 24V Hydraulic Pump 499/362 V351HPU2

A compact hydraulic power unit that creates hydraulic pressure to lower and raise the trim tabs.
It employs two solenoid valves to direct the flow of fluid to the actuators.
The solenoid valves lock tightly to secure the tabs in place.
The Lexan cover provides water resistance to the electrohydraulic unit, and the translucent reservoir allows fluid check at a glance.

Uses automatic transmission fluid.
Measures: 100mm x 188mm x 138mm
Includes:  Pump, solenoid valves, reservoir and cover.

Please the optional note pump mounting bracket (for vertical surface mount) is sold separately.

(990420)

Includes:  Pump, solenoid valves, reservoir and cover.

Practical Tips ans Advice:

(As advised by Bennett)

Use any type of Automatic Transmission Fluid (ATF).
Don’t worry about the exact brand or type – it will all work, and can even be mixed.
To add fluid, remove the Lexan cover on the HPU, locate the “filler stack” in the left front corner of the reservoir.
There is a round plug sealing the filler stack. Remove the plug and add fluid to the full line on the reservoir.
Note: Add fluid only with the trim tabs fully retracted (up).
If your reservoir does not have a full line, add fluid so the fluid level is about 1 inch below the top of the reservoir with the trim tabs fully retracted (up).
Your Bennett Trim Tab system should not need refilling for several seasons.

SKU 990420
Model # 499/362
Barcode # V351HPU2
Brand Bennett
Artist / Author Ruth Cunningham
Shipping Weight 3.1000kg
Shipping Width 0.140m
Shipping Height 0.180m
Shipping Length 0.230m
Unit Of Measure Each

We Also Recommend

More From This Category