Water Heater - Kuuma Aluminium 24 Litre with Side Mount Tabs 40610 
(Kuuma  was formerly branded Force 10 Marine)

Direct replacement for most Seaward, & Atwood Marine Water heaters.

These marine hot water systems are designed for use in boats, and are also installed in many motor homes, RV's and transport trucks. 

Tested and certified to the latest Australian standard AS/NZS 60335.2.21-2002 - ESO Approval No. Q080349 and ignition protected.
All Kuuma water heaters are now supplied with a sacrificial anode. 

Capacity: 6 Gallons (24 litres)
Case Material: Aluminium
Voltage: 230 Volt AC 1500 Watts
Heat Exchanger Position: front
Mount Postion: Sides
Length: 495mm
Width: 394mm
Height: 346mm
Dry Weight: 15kg

All Kuuma water heaters are now supplied with a sacrificial anode – this is the initial anode only and any subsequent anodes must be purchased separately. Anodes should be checked at least every three (3) to four (4) months.
Refer to the manual for advice on tank maintenance & care.

* Not recommended for use with raw/salt water in the engine heat exchange circuit as this will shorten the life of your water heater.
Direct replacement for most Seaward, & Atwood Marine Water heaters.

 

 

(990392)

SKU 990392
Model # 40610
Brand Kuuma
Artist / Author Ruth Cunningham
Shipping Weight 17.0000kg
Shipping Width 0.500m
Shipping Height 0.450m
Shipping Length 0.590m
Unit Of Measure Each

Others Also Bought

More From This Category